WAEC 2022/2023 Metal Work Practical Questions and Answers |Check Now

WAEC 2022/2023 Metal Work Practical Answers to Questions Theory and Objectives: Check now. Welcome, WAEC Metal Work Practical 2022 is well treated here. If you are in need of the solutions and other tips concerning it, keep reading.

There are many people online searching for this particular WAEC answers googling WAEC 2022 Metal Work Practical Answers to Questions, WAEC Alternative to Metalwork Practical Expo/runs 2022, WAEC 2022 Metal work Practical Runz,

WAEC Metal Work answers 2022, WAEC 2022 Metal Work Objectives and practical answers, WAEC Metal work essay anPractical answers Etc, All are the same, WE are going to Guide you through them.


WAEC Metal Work practical Answers

Metal work will be three papers, Papers 1, 2 and 3, all of which must be taken. Papers 1 and 2 will be a composite paper to be taken at one sitting.

PAPER 1: Will consist of forty multiple-choice objective questions all of which must be
answered within 1 hour for 40 marks.

PAPER 2: Will consist of five essay-type questions. Candidates will be required to answer four questions within 1 hour 30 minutes for a total of 60 marks.

PAPER 3: Will consist of two practical works, one of which must be carried out by candidates within 3 hours for 100 marks. Candidates shall be allowed 10 minutes, prior to the commencement of the test to study the drawings.

Alternative to WAEC Metal Work Practical Answers 2022



Recommended workshop size:

Purpose-bulk 14m length x 8m width x 4m height, well ventilated and illuminated.

Safety Equipment and Materials;

Fire extinguishers, first aid box, buckets of sand, CO2 wall charts etc.

1. Workshop Tools

(a) Cutting tools:   Hacksaw, drills, chisels, snips, files, stock and die, scrappers, reamers, turning tools, milling machine, shaping tools.

(b) Measuring tools:   Steel rules, inside and outside callipers, combination square, micrometer screw gauges,verniergauges, vernier protractors, spirit level, dial gauges.

(c) Marking out tools:   Surface gauge, surface plate, try square, vee-block, dividers, odd leg callipers, trammels, straight edge, scriber, angle plates, centre punches.

(d) Driving tools; pin punches, screwdrivers, hammers, drifts.

(e) Work holding devices: clamps, vices, pliers, mole grips, self gripping wrenches.

(f) Forging tools: hardies, fullers, tongs, swages, anvils, anvil stands, letter stamps and stakes, sand bag.

2. Workshop Equipment

Work benches, marking out table, blacksmith’s hearth, foundry furnace, sets of tool boxes, oil cans, computer hard ware and soft ware.

3. Machine Tools

Centre lathe(with accessories), sensitive and pillar drilling machines, pedestal grinder, power hacksaw, folding machine, shears, rolling machine, milling, shaping machine, etc

Welding Equipment

Standard arc welding machine accessories, electrodes, shields, aprons, chipping hammers, welding boots, standard oxygen and acetylene cylinders, filler rods, spark lighters, regulators, nozzles, etc.


Mild steel round bars (03mm – 050mm), Flat bars (of different sizes), Square bars, Hexagonal bars, Mild steel sheets and plates, Galvanized and tinned sheets.  Projects may be constructed with non-ferrous metal e.g. Copper, Aluminium and Brass.

Alternative to Metal Work Expo/Runs for 2022

Likely WAEC  Metal Work Practical Questions and Answers loading…

While answering these questions make sure you read the questions again and again. WAEC Metal Work Theory answers are where you will be required to answers some questions in form of an essay.

I hope this WAEC 2022/2023 Metal Work Practical Questions and Answers is very helpful to you , kindly share it with friends

About admin


View all posts by admin →

Leave a Reply

Your email address will not be published. Required fields are marked *